How to stop and start Actuate BIRT iHub
To stop Actuate BIRT iHub, perform the following tasks:
1 From the Actuate BIRT iHub console, type s and press Enter.
The message, Shutting down the server appears, as shown in
Figure 6‑10.
2 Wait for the shutdown process to complete.
After shutting down iHub, the command prompt closes automatically.
Figure 6‑10 Shutting down Actuate BIRT iHub 2from the console
To restart iHub, perform the following tasks:
1 Open a command prompt and navigate to AC_SERVER_HOME/bin.
2 Type the following command and press Enter, as shown in
Figure 6‑11:
startsrvr
Figure 6‑11 Starting Actuate BIRT iHub
A new Actuate BIRT iHub console opens, as shown earlier in
Figure 6‑4. This window must remain open, since the iHub service runs from this window.
